Extend equipment life, reduce downtime, and improve material flow.
Recycling equipment used for glass and paper processing is exposed to high abrasion, impact, and contamination. These conditions cause rapid wear, material buildup, and frequent maintenance.
MetaLine® wear-resistant coatings protect critical recycling components and help recycling plants operate more reliably and efficiently.
Why Recycling Equipment Wears So Fast
Glass shards, contaminants, and constant material movement place extreme stress on metal surfaces. Without proper protection, this leads to:
- Rapid abrasion and surface damage
- Blockages and poor material flow
- Increased downtime and repair costs
The MetaLine® Solution
MetaLine® Series 700 elastomeric coatings are designed for severe wear environments. They:
-
Absorb and dissipate impact energy
-
Resist abrasion and corrosion
-
Reduce sticking and material buildup
-
Can be tailored for thickness and surface friction
Typical Applications
MetaLine® coatings are commonly applied to:
-
Glass and material transfer chutes
-
Distribution and dosing systems
-
Vibrating tables and feeders
-
Shredders and macerators
-
High-wear liners and guide plates
- Describe your issue to us
We have a solution for problems with lifetime on recycling facilities! Scope of application: Feeding chutes (e.g. broken glass) Raw material distribution systems Dosing flaps Guiding devices Vibrating tables Special-purpose chutes Belt discharge points Macerators / shredders Stockpile loaders MetaLine - Technical solutions in detail METALINE SERIES 700 MetaLine Series 700 coatings combat purposefully the main causes of extreme wear, corrosion and material fatigue. The elastic function absorbs destructive energies, stores them temporarily and releases them shortly after exposure. Material thickness of the layers may be adapted individually. The material behaves neutrally against organic sticking and cannot be attacked by fouling or mold. Surface static friction may be varied from slip-resistant to glide-enhancing.
MetaLine Series 700 – MetaLine Series 700 coatings combat the main causes of extreme wear and material fatigue - energetic overload. The elastic material absorbs destructive energy, stores it for a short time and releases it again, immediately after exposure. For this purpose, the thickness of the material layer can be adjusted to any required degree. MetaLine Series 700 behaves neutrally against organic sticking and cannot be attacked by fouling or mold. Surface static friction may be varied from slip-resistant to glide-enhancing.
