The sudden failure of a pump always puts the operator under pressure: repair versus exchange? Almost a question of faith: availability of spare parts, delivery time, costs and in the end the basic service life problem is not resolved. Even the new spare part will not behave differently in terms of lifetime than the old one. A cycle that can only be broken via a technological change. No more "cost-what-it-must" maintenance – but regenerate resources with the help of modern repair technologies.
Ask us about: spiral pump casings, submergible pump casings, multi-level pump casings, liquid ring pump casings, end suction pumps, diffusers, split casings pumps, pulp pumps, flow straighteners
We have a solution for problems with erosion on housings by means of repair compounds! Scope of application: Spiral pump casings Submergible pump casings Multi-level pump casings Liquid ring pump casings End suction pumps Diffusers Split casings pumps Flow straighteners KSB Pumps in Test The elastomeric MetaLine coating technology is the winner of the pump coating test carried out by KSB Pumps (Germany). In comparison with 25 competitors our material technique with an up to 35 times higher wear resistance has won through! As the only (!) synthetic coating at all, MetaLine has been classified by KSB as a functional cavitation protection! The erosion resistance was even rated double as high as that of the KSB special material "Noridur"! MetaLine - Technical solutions in detail METALINE SERIES 700 MetaLine Series 700 coatings go far beyond simple repairs. Optimization of existing pump constructions by means of life-time extension and efficiency increase is a central issue. At the same time it is possible to reduce ongoing maintenance cost. Basically elastomeric coatings can be used as wear layer to protect the original component and mainly its static behavior. This wear layer may be renewed at low cost, if need be. The casing's strength and geometry is thus preserved. Repair of rubber pump semi-shells enables a special form of cost optimization. Existing exchangeable parts can be completely regenerated with minimum effort and expenditure. Cost savings compared to purchase of new parts are considerably. METALINE SERIES XL MetaLine Series XL offers repair materials which may be stored for an almost unlimited time and are hence available whenever needed. Partially eroded casings or simple pitting corrosion – with straightforward substrate preparation, sealing is possible directly at site. Since processing is quick and simple, the company-own operating personnel has a practical self-help means at hand – not for ever but until the next routine revision.
MetaLine Series 700 – Sprayable / OEM Manufacturer quality MetaLine Series 700 coatings go far beyond the idea of repair. Professional processing requirements whose reward is a massive increase in service life. The elastomer coating serves as a wear layer to protect the original component and its statics. If necessary, the wear layer can be renewed with little effort. The geometry of the housing remains unchanged. The cost savings compared to the procurement of new parts are considerable. MetaLine Series XL – Trowel- or brushable / Repair quality MetaLine Series XL offers repair materials that can be stored for an almost unlimited time and are available when “zero hour” arrives. Partially eroded casings or simple pitting corrosion – with straightforward substrate preparation, sealing is possible directly onsite. Quick and easy to work with, they give your own operating crew the tools needed to do it themselves – not for eternity, but until the next scheduled revision!
